LED-Config

Router

Ausgabe von:

for i in /sys/class/leds/*; do echo $i; done

Geräte-Name	LEDs
Zyxel WSM20	green:led1	green:led3	mt76-phy0	mt76-phy1	red:led4	red:system	white:led2	white:led5	white:system
Xiaomi Redmi Router AX6S	amber:net	amber:power	blue:net	blue:power	mt76-phy0
D-Link COVR-X1860 A1	mt76-phy0	mt76-phy1	orange:status	red:status	white:status
Xiaomi Mi Router 4A Gigabit Edition	blue:status	mt76-phy0	mt76-phy1	yellow:status
Netgear R6220	green:power	green:usb	green:wan	green:wifi	green:wps	mt76-phy0	mt76-phy1
GL.iNet GL-MT1300	blue:run	mt76-phy0	white:system
ZyXEL NWA55AXE
GL.iNet GL-MT6000	blue:run	mt76-phy0	mt76-phy1	white:system
YouHua WR1200JS	blue:internet	blue:usb	blue:wps	mt76-phy0	mt76-phy1
TP-Link RE650 v1	blue:power	blue:wifi2g	blue:wifi5g	blue:wps	green:eth_act	green:eth_link	mt76-phy0	mt76-phy1	red:wps
TP-Link Archer C6 v3 (8.2.7)	green:lan	green:power	green:wan	green:wifi2g	green:wifi5g	mt76-phy0	mt76-phy1	orange:wan
TP-Link TL-WDR4300 v1 (8.2.7)	ath9k-phy0	green:qss	green:system	green:usb1	green:usb2	green:wlan2g	green:wlan5g
TP-Link TL-WR1043ND v2 (8.2.7)	ath9k-phy0	green:system	green:usb	green:wlan	green:wps
Joy-IT JT-OR750i (8.2.4)	ath10k-phy0	ath9k-phy1	green:status	red:status
Genexis Pulse EX400	green:status	green:wan	green:wlan-2ghz	green:wlan-5ghz	green:wps	mt76-phy0	mt76-phy1	red:status
Netgear R6120	green:lan	green:power	green:wan	green:wlan2g	mt76-phy0	mt76-phy1	orange:wan	orange:wlan2g
AVM FRITZ!Box 7530	green:fon	green:info	green:power	green:wlan	green:wps	red:info
ASUS RT-AX53U	blue:power	blue:usb	mt76-phy0	mt76-phy1
Aruba AP-105	green:power	green:wlan2g	green:wlan5g	red:power	red:wlan2g	red:wlan5g
AVM FRITZ!Box 3370	ath9k-phy0	green:dsl	green:info	green:lan	green:power	green:wlan	red:info	red:power
Xiaomi Redmi Router AC2100	amber:status	amber:wan	mt76-phy0	mt76-phy1	white:status	white:wan
Cudy M3000 v1	green:lan	green:wan	mt76-phy0	mt76-phy1	red:wan-online	white:wan-online
D-Link DAP-X1860 A1	green:power	green:rssihigh	green:rssilow	green:rssimedium	mt76-phy0	mt76-phy1	orange:power	orange:rssilow	red:power
Netgear WAC104	green:power	green:wifi	green:wps	mt76-phy0	mt76-phy1
Cudy WR3000 v1	blue:internet	blue:lan	blue:status	blue:wan	blue:wifi2	blue:wifi5	mt76-phy0	mt76-phy1
AVM FRITZ!Box 7412	ath9k-phy0	green:dect	green:fon	green:info	green:power	green:wifi	red:power
AVM FRITZ!Box 7312	ath9k-phy0	green:dect	green:fon	green:info	green:power	green:wlan
AVM FRITZ!Box 7320	ath9k-phy0	green:dect	green:fon	green:info	green:power	green:wlan	red:info

Befehle

Beispiel LED ein:

echo 1 > /sys/class/leds/orange:wan/brightness

Beispiel LED aus:

echo 0 > /sys/class/leds/orange:wan/brightness

Alle aus

for i in /sys/class/leds/*; do echo 0 > "$i"/brightness; done

Alle ein

for i in /sys/class/leds/*; do echo 1 > "$i"/for i in /sys/class/leds/*; do echo $i; done; done

Herzschlag

for i in /sys/class/leds/*; do echo heartbeat > "$i"/trigger; done

Trigger timmer man

for i in /sys/class/leds/*; do echo timer > "$i"/trigger; done
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 200 > "$i"/delay_on; echo 200 > "$i"/delay_off; done
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 1 > "$i"/delay_on; echo 1 > "$i"/delay_off; done

Psyco

for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 10 > "$i"/delay_on; echo 100 > "$i"/delay_off; done

Psyco extended

n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $(($n * 10)) > "$i"/delay_on; echo $(($n * 1000)) > "$i"/delay_off; n=$(($n+1));  done

Lauflicht

n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $((n * 100)) > "$i"/delay_on; echo 100 > "$i"/delay_off; n=$(($n + 1));done