Ubnt EdgeRouter-X

Ubnt EdgeRouter X

Firmware flashen

Via ssh von original Firmware

1. connect router on LAN Port 0
2. ssh ubnt@192.168.1.1
   password "ubnt"
3. remote copy factory image to router
   on PC:
    scp lede-ramips-mt7621-ubnt-erx-initramfs-factory.tar ubnt@192.168.1.1:/tmp/
4: on router:
        cd /tmp
        add system image lede-ramips-mt7621-ubnt-erx-initramfs-factory.tar
        show system image
        reboot
5. weiter unter "Weitere Schritte"

(siehe auch [1] | Anleitung Freifunk Winterberg)

Via serial Console

1. install tftp server on linux pc
2. connect lan cable on port 0
3. put lede-ramips-mt7621-ubnt-erx-initramfs-kernel.bin and rename it to
   "kernel.bin" (for easier usage)
4. boot device and select "2" from menu (there is a timeout)
5. specifiy router ip, server ip and kernel.bin
6. weiter unter "Weitere Schritte"

Schritt 2: Weitere Schritte

6. wait until kernel reboots
7. press "enter" to get to command line of firmware (there is still no overlayfs)
8. now LAN Port 0 is used as WAN port. you can use this if it has an ip.
   Or plugin network cable in PORT 1 (LAN).
9. Router has ip 192.168.1.1
10. on PC remote copy
        scp lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar root@192.168.1.1:/tmp/
11. make a sysupgrade (which creates overlayfs)
    sysupgrade /tmp/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar
12. Device boots three times.
13. optionally install OVPN package (openvpn may be already installed)

Offloader Konfigurationen

Der Offloader kann unterschiedlich angebunden werden.

-> Mögliche Offloader-Konfigurationen