Ubnt EdgeRouter-X: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(initial ubnt edge router x) |
|||
Zeile 45: | Zeile 45: | ||
= Offloader Konfigurationen = | = Offloader Konfigurationen = | ||
− | Der Offloader kann unterschiedlich angebunden werden. [[Offloader_Konfiguration|Mögliche Offloader-Konfigurationen]] | + | Der Offloader kann unterschiedlich angebunden werden. |
+ | -> [[Offloader_Konfiguration|Mögliche Offloader-Konfigurationen]] |
Version vom 31. März 2018, 15:02 Uhr
Inhaltsverzeichnis
Hardware
Firmware flashen
Via ssh von original Firmware
1. connect router on LAN Port 0 2. ssh ubnt@192.168.1.1 password "ubnt" 3. remote copy factory image to router on PC: scp lede-ramips-mt7621-ubnt-erx-initramfs-factory.tar ubnt@192.168.1.1:/tmp/ 4: on router: cd /tmp add system image lede-ramips-mt7621-ubnt-erx-initramfs-factory.tar show system image reboots 5. weiter unter "Weitere Schritte"
(siehe auch Anleitung Freifunk Winterberg)
Via serial Console
1. install tftp server on linux pc 2. connect lan cable on port 0 3. put lede-ramips-mt7621-ubnt-erx-initramfs-kernel.bin and rename it to "kernel.bin" (for easier usage) 4. boot device and select "2" from menu (there is a timeout) 5. specifiy router ip, server ip and kernel.bin 6. weiter unter "Weitere Schritte"
Schritt 2: Weitere Schritte
6. wait until kernel reboots 7. press "enter" to get to command line of firmware (there is still no overlayfs) 8. now LAN Port 0 is used as WAN port. you can use this if it has an ip. Or plugin network cable in PORT 1 (LAN). 9. Router has ip 192.168.1.1 10. on PC remote copy scp lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar root@192.168.1.1:/tmp/ 11. make a sysupgrade (which creates overlayfs) sysupgrade /tmp/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar 12. Device boots three times. 13. optionally install OVPN package (openvpn may be already installed)
Offloader Konfigurationen
Der Offloader kann unterschiedlich angebunden werden.
-> Mögliche Offloader-Konfigurationen