LED-Config: Unterschied zwischen den Versionen

Aus Freifunk Dresden - Anwender-Wiki
Zur Navigation springen Zur Suche springen
K (Wessenstein Router)
 
(6 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
 +
== Router ==
 +
 
Ausgabe von:
 
Ausgabe von:
  
 
  for i in /sys/class/leds/*; do echo $i; done
 
  for i in /sys/class/leds/*; do echo $i; done
  
−
Beispiel LED ein:
+
{| class="wikitable zebra toptextcells sortable"  style="background:white;
−
echo 1 > /sys/class/leds/orange:wan/brightness
 
−
Beispiel LED aus:
 
−
echo 0 > /sys/class/leds/orange:wan/brightness
 
−
 
 
−
{| class="wikitable zebra toptextcells"  style="background:white;
 
 
|-
 
|-
 
! Geräte-Name
 
! Geräte-Name
Zeile 196: Zeile 193:
 
| colspan="1" style="background:#424242" | mt76-phy0
 
| colspan="1" style="background:#424242" | mt76-phy0
 
| colspan="1" style="background:#424242" | mt76-phy1
 
| colspan="1" style="background:#424242" | mt76-phy1
−
| colspan="1" style="color:grey" | white:status
+
| colspan="1" style="background:white" | white:status
−
| colspan="1" style="color:grey" | white:wan
+
| colspan="1" style="background:white" | white:wan
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | Cudy M3000 v1
 +
| colspan="1" style="background:green" | green:lan
 +
| colspan="1" style="background:green" | green:wan
 +
| colspan="1" style="background:#424242" | mt76-phy0
 +
| colspan="1" style="background:#424242" | mt76-phy1
 +
| colspan="1" style="background:red" | red:wan-online
 +
| colspan="1" style="background:white" | white:wan-online
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | D-Link DAP-X1860 A1
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:rssihigh
 +
| colspan="1" style="background:green" | green:rssilow
 +
| colspan="1" style="background:green" | green:rssimedium
 +
| colspan="1" style="background:#424242" | mt76-phy0
 +
| colspan="1" style="background:#424242" | mt76-phy1
 +
| colspan="1" style="background:orange" | orange:power
 +
| colspan="1" style="background:orange" | orange:rssilow
 +
| colspan="1" style="background:red" | red:power
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | Netgear WAC104
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:wifi
 +
| colspan="1" style="background:green" | green:wps
 +
| colspan="1" style="background:#424242" | mt76-phy0
 +
| colspan="1" style="background:#424242" | mt76-phy1
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | Cudy WR3000 v1
 +
| colspan="1" style="background:blue" | blue:internet
 +
| colspan="1" style="background:blue" | blue:lan
 +
| colspan="1" style="background:blue" | blue:status
 +
| colspan="1" style="background:blue" | blue:wan
 +
| colspan="1" style="background:blue" | blue:wifi2
 +
| colspan="1" style="background:blue" | blue:wifi5
 +
| colspan="1" style="background:#424242" | mt76-phy0
 +
| colspan="1" style="background:#424242" | mt76-phy1
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | AVM FRITZ!Box 7412
 +
| colspan="1" style="background:#424242" | ath9k-phy0
 +
| colspan="1" style="background:green" | green:dect
 +
| colspan="1" style="background:green" | green:fon
 +
| colspan="1" style="background:green" | green:info
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:wifi
 +
| colspan="1" style="background:red" | red:power
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | AVM FRITZ!Box 7312
 +
| colspan="1" style="background:#424242" | ath9k-phy0
 +
| colspan="1" style="background:green" | green:dect
 +
| colspan="1" style="background:green" | green:fon
 +
| colspan="1" style="background:green" | green:info
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:wlan
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | AVM FRITZ!Box 7320
 +
| colspan="1" style="background:#424242" | ath9k-phy0
 +
| colspan="1" style="background:green" | green:dect
 +
| colspan="1" style="background:green" | green:fon
 +
| colspan="1" style="background:green" | green:info
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:wlan
 +
| colspan="1" style="background:red" | red:info
 +
|colspan="10" style="background:black" |
 +
|-
 +
| colspan="1" style="color:grey" | TP-Link Archer C60 v1
 +
 
 +
| colspan="1" style="background:gold" | amber:wan
 +
| colspan="1" style="background:#424242" | ath10k-phy0
 +
| colspan="1" style="background:#424242" | ath9k-phy1
 +
| colspan="1" style="background:green" | green:lan
 +
| colspan="1" style="background:green" | green:power
 +
| colspan="1" style="background:green" | green:wan
 +
| colspan="1" style="background:green" | green:wlan2g
 +
| colspan="1" style="background:green" | green:wlan5g
 +
| colspan="1" style="background:green" | green:wps
 +
|colspan="10" style="background:black" |
 +
 
 +
|-
 +
| colspan="1" style="color:grey" | TP-Link Archer C5 v1
 +
| colspan="1" style="background:#424242" | ath9k-phy1
 +
| colspan="1" style="background:green" | green:qss
 +
| colspan="1" style="background:green" | green:system
 +
| colspan="1" style="background:green" | green:usb1
 +
| colspan="1" style="background:green" | green:usb2
 +
| colspan="1" style="background:green" | green:wlan2g
 +
| colspan="1" style="background:green" | green:wlan5g
 
|colspan="10" style="background:black" |
 
|colspan="10" style="background:black" |
 +
 +
|-
 +
| colspan="1" style="color:grey" | TP-Link TL-WR1043N v5
 +
| colspan="1" style="background:#424242" | ath9k-phy0
 +
| colspan="1" style="background:green" | green:lan1
 +
| colspan="1" style="background:green" | green:lan2
 +
| colspan="1" style="background:green" | green:lan3
 +
| colspan="1" style="background:green" | green:lan4
 +
| colspan="1" style="background:green" | green:system
 +
| colspan="1" style="background:green" | green:wan
 +
| colspan="1" style="background:green" | green:wlan
 +
| colspan="1" style="background:green" | green:wps
 +
| colspan="1" style="background:orange" | orange:wan
 +
|colspan="10" style="background:black" |
 +
  
 
|-
 
|-
  
 
|}
 
|}
 +
 +
== Befehle ==
 +
 +
Beispiel LED ein:
 +
echo 1 > /sys/class/leds/orange:wan/brightness
 +
Beispiel LED aus:
 +
echo 0 > /sys/class/leds/orange:wan/brightness
 +
 +
Alle aus
 +
for i in /sys/class/leds/*; do echo 0 > "$i"/brightness; done
 +
 +
Alle ein
 +
for i in /sys/class/leds/*; do echo 1 > "$i"/for i in /sys/class/leds/*; do echo $i; done; done
 +
 +
Herzschlag
 +
for i in /sys/class/leds/*; do echo heartbeat > "$i"/trigger; done
 +
 +
Trigger timmer man
 +
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; done
 +
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 200 > "$i"/delay_on; echo 200 > "$i"/delay_off; done
 +
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 1 > "$i"/delay_on; echo 1 > "$i"/delay_off; done
 +
 +
Psyco
 +
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 10 > "$i"/delay_on; echo 100 > "$i"/delay_off; done
 +
 +
Psyco extended
 +
n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $(($n * 10)) > "$i"/delay_on; echo $(($n * 1000)) > "$i"/delay_off; n=$(($n+1));  done
 +
 +
Lauflicht
 +
n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $((n * 100)) > "$i"/delay_on; echo 100 > "$i"/delay_off; n=$(($n + 1));done

Aktuelle Version vom 26. März 2026, 07:08 Uhr

Router

Ausgabe von: 

for i in /sys/class/leds/*; do echo $i; done
Geräte-Name LEDs
Zyxel WSM20 green:led1 green:led3 mt76-phy0 mt76-phy1 red:led4 red:system white:led2 white:led5 white:system
Xiaomi Redmi Router AX6S amber:net amber:power blue:net blue:power mt76-phy0
D-Link COVR-X1860 A1 mt76-phy0 mt76-phy1 orange:status red:status white:status
Xiaomi Mi Router 4A Gigabit Edition blue:status mt76-phy0 mt76-phy1 yellow:status
Netgear R6220 green:power green:usb green:wan green:wifi green:wps mt76-phy0 mt76-phy1
GL.iNet GL-MT1300 blue:run mt76-phy0 white:system
ZyXEL NWA55AXE
GL.iNet GL-MT6000 blue:run mt76-phy0 mt76-phy1 white:system
YouHua WR1200JS blue:internet blue:usb blue:wps mt76-phy0 mt76-phy1
TP-Link RE650 v1 blue:power blue:wifi2g blue:wifi5g blue:wps green:eth_act green:eth_link mt76-phy0 mt76-phy1 red:wps
TP-Link Archer C6 v3 (8.2.7) green:lan green:power green:wan green:wifi2g green:wifi5g mt76-phy0 mt76-phy1 orange:wan
TP-Link TL-WDR4300 v1 (8.2.7) ath9k-phy0 green:qss green:system green:usb1 green:usb2 green:wlan2g green:wlan5g
TP-Link TL-WR1043ND v2 (8.2.7) ath9k-phy0 green:system green:usb green:wlan green:wps
Joy-IT JT-OR750i (8.2.4) ath10k-phy0 ath9k-phy1 green:status red:status
Genexis Pulse EX400 green:status green:wan green:wlan-2ghz green:wlan-5ghz green:wps mt76-phy0 mt76-phy1 red:status
Netgear R6120 green:lan green:power green:wan green:wlan2g mt76-phy0 mt76-phy1 orange:wan orange:wlan2g
AVM FRITZ!Box 7530 green:fon green:info green:power green:wlan green:wps red:info
ASUS RT-AX53U blue:power blue:usb mt76-phy0 mt76-phy1
Aruba AP-105 green:power green:wlan2g green:wlan5g red:power red:wlan2g red:wlan5g
AVM FRITZ!Box 3370 ath9k-phy0 green:dsl green:info green:lan green:power green:wlan red:info red:power
Xiaomi Redmi Router AC2100 amber:status amber:wan mt76-phy0 mt76-phy1 white:status white:wan
Cudy M3000 v1 green:lan green:wan mt76-phy0 mt76-phy1 red:wan-online white:wan-online
D-Link DAP-X1860 A1 green:power green:rssihigh green:rssilow green:rssimedium mt76-phy0 mt76-phy1 orange:power orange:rssilow red:power
Netgear WAC104 green:power green:wifi green:wps mt76-phy0 mt76-phy1
Cudy WR3000 v1 blue:internet blue:lan blue:status blue:wan blue:wifi2 blue:wifi5 mt76-phy0 mt76-phy1
AVM FRITZ!Box 7412 ath9k-phy0 green:dect green:fon green:info green:power green:wifi red:power
AVM FRITZ!Box 7312 ath9k-phy0 green:dect green:fon green:info green:power green:wlan
AVM FRITZ!Box 7320 ath9k-phy0 green:dect green:fon green:info green:power green:wlan red:info
TP-Link Archer C60 v1 amber:wan ath10k-phy0 ath9k-phy1 green:lan green:power green:wan green:wlan2g green:wlan5g green:wps
TP-Link Archer C5 v1 ath9k-phy1 green:qss green:system green:usb1 green:usb2 green:wlan2g green:wlan5g
TP-Link TL-WR1043N v5 ath9k-phy0 green:lan1 green:lan2 green:lan3 green:lan4 green:system green:wan green:wlan green:wps orange:wan


Befehle

Beispiel LED ein: 

echo 1 > /sys/class/leds/orange:wan/brightness

Beispiel LED aus: 

echo 0 > /sys/class/leds/orange:wan/brightness

Alle aus 

for i in /sys/class/leds/*; do echo 0 > "$i"/brightness; done

Alle ein 

for i in /sys/class/leds/*; do echo 1 > "$i"/for i in /sys/class/leds/*; do echo $i; done; done

Herzschlag 

for i in /sys/class/leds/*; do echo heartbeat > "$i"/trigger; done

Trigger timmer man 

for i in /sys/class/leds/*; do echo timer > "$i"/trigger; done
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 200 > "$i"/delay_on; echo 200 > "$i"/delay_off; done
for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 1 > "$i"/delay_on; echo 1 > "$i"/delay_off; done

Psyco 

for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo 10 > "$i"/delay_on; echo 100 > "$i"/delay_off; done

Psyco extended 

n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $(($n * 10)) > "$i"/delay_on; echo $(($n * 1000)) > "$i"/delay_off; n=$(($n+1));  done

Lauflicht 

n=1; for i in /sys/class/leds/*; do echo timer > "$i"/trigger; echo $((n * 100)) > "$i"/delay_on; echo 100 > "$i"/delay_off; n=$(($n + 1));done
Abgerufen von „https://wiki.freifunk-dresden.de/index.php?title=LED-Config&oldid=8165“