Aerohive AP-330: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Keine Bearbeitungszusammenfassung |
Keine Bearbeitungszusammenfassung |
||
| (5 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 3: | Zeile 3: | ||
Aerohive AP-330: | Aerohive AP-330: | ||
ACHTUNG-HINWEIS: das flashen (sysupgrade) dauert sehr lange. einfach warten. bis 5min (auch über GUI). | |||
data | |||
------------------------------------ | |||
IP Address: 192.168.1.1 | IP Address: 192.168.1.1 | ||
IP Address: 192.168.2.10 | IP Address: 192.168.2.10 | ||
| Zeile 12: | Zeile 17: | ||
uboot password: administrator | uboot password: administrator | ||
flash | |||
------------------------------------ | ------------------------------------ | ||
# connect to eth0 (will be later WAN in freifunk firmware) | # connect to eth0 (will be later WAN in freifunk firmware) | ||
| Zeile 25: | Zeile 31: | ||
cd /tmp | cd /tmp | ||
sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin | sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin | ||
serial (router -> pc) | |||
9600,8,N,1 | |||
------------------ | |||
RJ54:3-TX -> DB-9: 3 | |||
RJ54:6-RX -> DB-9: 2 | |||
RJ54:5-GND -> DB-9: 5 | |||
USB-Serial 3.3V Adapter do not work correctly. | |||
</pre> | </pre> | ||
Aktuelle Version vom 25. Mai 2020, 00:45 Uhr
Aerohive AP-330: ACHTUNG-HINWEIS: das flashen (sysupgrade) dauert sehr lange. einfach warten. bis 5min (auch über GUI). data ------------------------------------ IP Address: 192.168.1.1 IP Address: 192.168.2.10 IP Address: 192.168.85.1 normal login Username: admin Password: aerohive uboot password: administrator flash ------------------------------------ # connect to eth0 (will be later WAN in freifunk firmware) setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.31 tftpboot 0x1000000 openwrt-mpc85xx-p1020-hiveap-330-initramfs-kernel.bin tftpboot 0x6000000 openwrt-mpc85xx-p1020-hiveap-330-squashfs-fdt.bin bootm 0x1000000 - 0x6000000 # nach booten: # lan cable in eth1 (LAN) # scp sysupgrade uebertragen und flashen scp openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin 192.168.1.1:/tmp cd /tmp sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin serial (router -> pc) 9600,8,N,1 ------------------ RJ54:3-TX -> DB-9: 3 RJ54:6-RX -> DB-9: 2 RJ54:5-GND -> DB-9: 5 USB-Serial 3.3V Adapter do not work correctly.