Aerohive AP-330: Unterschied zwischen den Versionen

Aus Freifunk Dresden - Anwender-Wiki
Zur Navigation springen Zur Suche springen
Zeile 36: Zeile 36:
 
RJ54:6-RX  -> DB-9: 2
 
RJ54:6-RX  -> DB-9: 2
 
RJ54:5-GND  -> DB-9: 5
 
RJ54:5-GND  -> DB-9: 5
 +
USB-Serial 3.3V Adapter do not work correctly.
 
</pre>
 
</pre>

Version vom 24. Mai 2020, 19:26 Uhr


Aerohive AP-330:


data
------------------------------------
IP Address:	192.168.1.1
IP Address:	192.168.2.10
IP Address:	192.168.85.1
normal login
 Username:	admin
 Password:	aerohive

uboot password: administrator

flash
------------------------------------
# connect to eth0 (will be later WAN in freifunk firmware)
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.31
tftpboot 0x1000000 openwrt-mpc85xx-p1020-hiveap-330-initramfs-kernel.bin
tftpboot 0x6000000 openwrt-mpc85xx-p1020-hiveap-330-squashfs-fdt.bin
bootm 0x1000000 - 0x6000000
# nach booten:
#  lan cable in eth1 (LAN)
#  scp sysupgrade uebertragen und flashen
scp openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin 192.168.1.1:/tmp
cd /tmp
sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin


serial   (router -> pc)
------------------
RJ54:3-TX   -> DB-9: 3
RJ54:6-RX   -> DB-9: 2
RJ54:5-GND  -> DB-9: 5
USB-Serial 3.3V Adapter do not work correctly.