Aerohive AP-330: Unterschied zwischen den Versionen

Aus Freifunk Dresden - Anwender-Wiki
Zur Navigation springen Zur Suche springen
 
(5 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 3: Zeile 3:
 
Aerohive AP-330:
 
Aerohive AP-330:
  
 +
ACHTUNG-HINWEIS: das flashen (sysupgrade) dauert sehr lange. einfach warten. bis 5min (auch über GUI).
 +
 +
 +
data
 +
------------------------------------
 
IP Address: 192.168.1.1
 
IP Address: 192.168.1.1
 
IP Address: 192.168.2.10
 
IP Address: 192.168.2.10
Zeile 12: Zeile 17:
 
uboot password: administrator
 
uboot password: administrator
  
 +
flash
 
------------------------------------
 
------------------------------------
 
# connect to eth0 (will be later WAN in freifunk firmware)
 
# connect to eth0 (will be later WAN in freifunk firmware)
Zeile 25: Zeile 31:
 
cd /tmp
 
cd /tmp
 
sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin
 
sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin
 +
 +
 +
serial  (router -> pc)
 +
9600,8,N,1
 +
------------------
 +
RJ54:3-TX  -> DB-9: 3
 +
RJ54:6-RX  -> DB-9: 2
 +
RJ54:5-GND  -> DB-9: 5
 +
USB-Serial 3.3V Adapter do not work correctly.
 +
 +
 +
 +
 
</pre>
 
</pre>

Aktuelle Version vom 25. Mai 2020, 00:45 Uhr


Aerohive AP-330:

ACHTUNG-HINWEIS: das flashen (sysupgrade) dauert sehr lange. einfach warten. bis 5min (auch über GUI).


data
------------------------------------
IP Address:	192.168.1.1
IP Address:	192.168.2.10
IP Address:	192.168.85.1
normal login
 Username:	admin
 Password:	aerohive

uboot password: administrator

flash
------------------------------------
# connect to eth0 (will be later WAN in freifunk firmware)
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.31
tftpboot 0x1000000 openwrt-mpc85xx-p1020-hiveap-330-initramfs-kernel.bin
tftpboot 0x6000000 openwrt-mpc85xx-p1020-hiveap-330-squashfs-fdt.bin
bootm 0x1000000 - 0x6000000
# nach booten:
#  lan cable in eth1 (LAN)
#  scp sysupgrade uebertragen und flashen
scp openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin 192.168.1.1:/tmp
cd /tmp
sysupgrade openwrt-mpc85xx-p1020-hiveap-330-squashfs-sysupgrade.bin


serial   (router -> pc)
9600,8,N,1
------------------
RJ54:3-TX   -> DB-9: 3
RJ54:6-RX   -> DB-9: 2
RJ54:5-GND  -> DB-9: 5
USB-Serial 3.3V Adapter do not work correctly.